Shopping Cart

Bungee Loop (adhesive & epoxy-on, Clear & Black)


Bungee Loop Anchors come in two styles:

The Non-Self Adhesive style must be mounted using epoxy. Align the bungee loop and trace it's outline onto the mounting surface. Using sandpaper, roughen (scuff) the underside of the bungee mount and also the surface under where it is going to be mounted (inside of the traced outline). Use a little bit of epoxy and it'll never come off.

The Self Adhesive style is easier to mount but not as permanent. Clean the mounting surface with acetone. Peel off the backing to expose the adhesive, align the piece and press down firmly. Mounts best to a flat surface.

Use with our 3/16 bungee cord.

For installation instructions, follow the link below...

Priced per each piece.

Add to Cart:

Please Choose:


This product was added to our catalog on Monday 22 May, 2006.

Copyright © 2018 Powered by Zen Cart
if you have to think ... you haven't been Zenned!