(image for) Powered by Zen Cart :: The Art of E-Commerce

Boat Parts



  Product Name- Price
(image for) Whale Tail Yoke for Huki canoes & surfskis

Whale Tail Yoke for Huki canoes & surfskis

Yoke or T-bar to fit all Huki paddle craft. This ornate whale tail shaped yoke has been used on all Huki paddle craft since the turn of the century....
$35.00

... more info

(image for) Venturi Set

Venturi Set

Replacement Venturi's for vacuumed assisted footwells - Comes in full sets of enough pieces to update two drain holes...The front piece is called the...
$129.00

... more info

(image for) Universal Rudder Shaft for Other Manufacturers

Universal Rudder Shaft for Other Manufacturers

Universal HUKI rudder shaft fits any yoke (T-bar) with a square hole of almost any size. Includes manufacturers, such as: Kaku, Kamanu Composites,...
$65.00

... more info

(image for) Surf Ski Foot Straps (Double Footwell: divider separating feet)

Surf Ski Foot Straps (Double Footwell: divider separating feet)

Surf Ski Foot Straps by HUKI Keeps your feet in the boat and you out of the water. Foot straps fit universally on all HUKI Surf Skis with double...
$35.00

... more info

(image for) Surf Ski Foot Strap (Single Footwell: no divider between feet)

Surf Ski Foot Strap (Single Footwell: no divider between feet)

Surf Ski Foot Strap by HUKI Keeps your feet in the boat and keeps you out of the water...When your surfski starts to roll or flood you out, hook the...
$45.00

... more info

(image for) Stow Hatch with Fat Bag

Stow Hatch with Fat Bag

Almost all current and past canoes and surfskis built by HUKI can be retro fitted with this stow hatch in multiple locations. Unscrew the clear, hard...
$35.00

... more info

(image for) Snorkel-Plug for drain holes

Snorkel-Plug for drain holes

Drain Plug with Snorkel - Replacement drain plug with built in air duct that allows air to expand out of the hull or to contract into the hull to...
$11.00

... more info

(image for) Small Knob for Rudder Shafts

Small Knob for Rudder Shafts

Replacement knob for all HUKI rudder shafts that fit Huki Outrigger Canoes and Surfskis. Three soft lobes, Threaded 1/4-20 UNC (Ø 1/4" Coarse...
$5.00

... more info

(image for) Small Knob for Adjustable Foot Pedals

Small Knob for Adjustable Foot Pedals

Replacement knob for early model HUKI SurfSkis with adjustable double foot wells. The older style that used two separate slotted aluminum sliding...
$5.00

... more info

(image for) Rudder Shaft for most Hawaiian/N. American Built Canoes

Rudder Shaft for most Hawaiian/N. American Built Canoes

HUKI rudder shaft specifically designed to fit almost all Outrigger Canoes, kayaks, surfskis and SUP that have a quarter inch square hole in the yoke...
$65.00

... more info

(image for) Rudder Cables Replacement Kit

Rudder Cables Replacement Kit

Replacement rudder cables come in 6 types. You must select the appropriate cable set based on the model and construction date from the radio buttons...
$69.00

... more info

(image for) Large Knob for the V2-A

Large Knob for the V2-A

Replacement knob for the HUKI V2-A outrigger Canoe. Threaded 1/2-13 UNC (Ø 1/2" Coarse Thread). This knob also fits many of the older style OC-2 by...
$9.00

... more info

(image for) Large Knob for Older Style V1's stubby rigging & ama

Large Knob for Older Style V1's stubby rigging & ama

The five lobe knob has 3/8 inch coarse threads in a blind hole. These are found on Huki stubby iako sets on our whole variety of OC-1 and OC-2. These...
$9.00

... more info

(image for) Kelp Guard

Kelp Guard

Kelp guard (tiny skeg in front of rudder). This helps to prevent grass from catching between the rudder blade and the bottom of the hull. It's really...
$35.00

... more info

(image for) Iako Set to fit Kaku Elua (after market, made by Huki)

Iako Set to fit Kaku Elua (after market, made by Huki)

Iako Set to fit Kaku Elua OC-1. This iako set is made by Huki to fit the Kaku. It is not an original Kaku part. It rigs to the original Kaku ama. The...
$525.00

... more info

(image for) HUKI Rudder Shaft

HUKI Rudder Shaft

HUKI rudder shaft fits any HUKI yoke (T-bar) with a hex receptacle. Made of marine stainless steel for corrosion resistance and superior strength....
$65.00

... more info

(image for) Heel Plate Assembly for Huki Surfskis, pre-2012 & small cockpit

Heel Plate Assembly for Huki Surfskis, pre-2012 & small cockpit

Comes fully assembled and ready to placed onto your original slide tracks. Fits the current production S1-R with small cockpit, and fits all Huki...
$480.00

... more info
(image for) Sold Out

(image for) Heel Plate Assembly for Huki Surfskis 2012 onward

Heel Plate Assembly for Huki Surfskis 2012 onward

Comes fully assembled and ready to placed onto your original slide tracks. Fits all current production Huki Surfskis from 2012 onward except for...
$480.00

... more info
(image for) Sold Out

(image for) Fiberglass Seat Track Rod

Fiberglass Seat Track Rod

Replacement rod for factory installed slide track seats. Rod is used on all HUKI Single and Double Outrigger Canoes along with Dragonboats. For...
$7.00

... more info

(image for) Eye-End swage fitting for 1/16 in cable

Eye-End swage fitting for 1/16 in cable

Eye End - swage (crimp) fitting for 1/16 inch cable. Aerospace Grade Stainless Steel. This is the eye ends that are used on all Huki steering...
$13.00

... more info

(image for) Detent Button (Other Canoes)

Detent Button (Other Canoes)

Stainless spring detent, 5/16" diameter button, to fit iako tubes on canoes from some other manufacturers. This button was used an a large variety of...
$5.00

... more info

(image for) Detent Button ( HUKI Canoes)

Detent Button (HUKI Canoes)

Stainless spring detent, 3/8" diameter, to fit iako tubes on HUKI canoes. This button size was often used on Kaku canoes and John Martin canoes. Made...
$5.00

... more info

(image for) Clevis Pin & Ring Clip

Clevis Pin & Ring Clip

3/16 inch diameter clevis pin 1/4 inch long, and ring clip, one of each. Fits HUKI Surfskis and Huki Outrigger Canoes at cable eye-ends for rudder...
$8.00

... more info

(image for) Carbon Fiber Seat Car

Carbon Fiber Seat Car

Replacement Carbon Fiber Seat Car for Huki Slide Track Seats. Seat Car fits all Huki Single & Double Outrigger Canoes as well as Dragonboats.
$120.00

... more info

(image for) Cable Ball-Stop

Cable Ball-Stop

Crimp on cable ball-stop to fit HUKI Ø1/16 rudder cable. Made of stainless steel for corrosion resistance. Priced per piece. You can find whole...
$2.50

... more info

(image for) Bungee Loop, Screw Mount

Bungee Loop, Screw Mount

Bungee Loop Anchors, Screw style: Used on our older boat models. The Screw style Bungee Loop mounts very strongly, but requires drilling and sealing...
$1.75

... more info

(image for) Bungee Loop (adhesive & epoxy-on, Clear & Black)

Bungee Loop (adhesive & epoxy-on, Clear & Black)

Bungee Loop Anchors come in two styles:
$3.95

... more info

(image for) Bungee Cord

Bungee Cord

Replacement Bungee Cord is the same elastic cord that is used on all HUKI boats and other similar watercraft. Best application of cord is for the...


... more info

(image for) Aluminum Cars (two) with plunger for Huki adj track systems

Aluminum Cars (two) with plunger for Huki adj track systems

Aluminum Car Set of Two (one pair), enough for both sides of one cockpit heel plate. Comes with three threaded holes in each car and two sets of six...
$150.00

... more info

(image for)  HUKI Universal Foam Seat for OC-1 & OC-2

HUKI Universal Foam Seat for OC-1 & OC-2

Upgrade your canoe for more comfort. Universal foam tractor seats are available to fit all OC-1's and other canoes. These seats can be fastened down...
$169.00

... more info


Copyright © 2024 huki.com. Powered by Zen Cart