HUKI.com Shopping Cart

Boat Parts



Product Image Item Name- Price
Aluminum Car with plunger for Huki adj track systems

Aluminum Car with plunger for Huki adj track systems

Aluminum Car Set of Two (one pair), enough for both sides of one cockpit heel plate. Comes with three threaded holes in each car and two sets of six...
$100.00

... more info

Bungee Cord

Bungee Cord

Replacement Bungee Cord is the same elastic cord that is used on all HUKI boats and other similar watercraft. Best application of cord is for the...


... more info

Cable Ball-Stop

Cable Ball-Stop

Crimp on cable ball-stop to fit HUKI 1/16 rudder cable. Made of stainless steel for corrosion resistance. Priced per piece.
$2.00

... more info

Carbon Fiber Seat Car

Carbon Fiber Seat Car

Replacement Carbon Fiber Seat Car for Huki Slide Track Seats. Seat Car fits all Huki Single & Double Outrigger Canoes as well as Dragonboats.
$80.00

... more info

Clevis Pin & Ring Clip

Clevis Pin & Ring Clip

3/16 inch clevis pin and ring clip pair. Fits HUKI Surfskis and Huki Outrigger Canoes at cable eye-ends for rudder yoke and some of our foot pedal...
$5.00

... more info

Eye-End swage fitting for 1/16 in cable

Eye-End swage fitting for 1/16 in cable

Eye End - swage (crimp) fitting for 1/16 inch cable. Aerospace Grade Stainless Steel. This is the eye ends that are used on all Huki steering...
$10.00

... more info

Fiberglass Seat Track Rod

Fiberglass Seat Track Rod

Replacement rod for factory installed slide track seat. Rod is used on all HUKI Single and Double Outrigger Canoes along with Dragonboats.
$4.00

... more info

Heel Plate Assembly for Huki Surfskis 2012 onward

Heel Plate Assembly for Huki Surfskis 2012 onward

Comes fully assembled and ready to placed onto your original slide tracks. Fits all current production Huki Surfskis from 2012 onward except for...
$480.00  $335.00
Save: 30% off


... more info

Heel Plate Assembly for Huki Surfskis, pre-2012 & small cockpit

Heel Plate Assembly for Huki Surfskis, pre-2012 & small cockpit

Comes fully assembled and ready to placed onto your original slide tracks. Fits the current production S1-R with small cockpit, and fits all Huki...
$480.00  $335.00
Save: 30% off


... more info

HUKI Rudder Shaft

HUKI Rudder Shaft

HUKI rudder shaft fits any HUKI yoke (T-bar) with a hex receptacle. Made of marine stainless steel for corrosion resistance and superior strength....
$45.00

... more info

Iako Set to fit Kaku Elua (after market, made by Huki)

Iako Set to fit Kaku Elua (after market, made by Huki)

Iako Set to fit Kaku Elua OC-1. This iako set is made by Huki to fit the Kaku. It is not an original Kaku part. It rigs to the original Kaku ama. The...
$275.00

... more info

Rudder Shaft for most Hawaiian/N. American Built Canoes

Rudder Shaft for most Hawaiian/N. American Built Canoes

HUKI rudder shaft specifically designed to fit almost all Outrigger Canoes, kayaks, surfskis and SUP that have a quarter inch square hole in the yoke...
$45.00

... more info

Universal Rudder Shaft for Other Manufacturers

Universal Rudder Shaft for Other Manufacturers

Universal HUKI rudder shaft fits any yoke (T-bar) with a square hole of almost any size. Includes manufacturers, such as: Kaku, Kamanu Composites,...
$45.00

... more info

V1-R Custom Fitted Foam Seat(2010 model or newer)

V1-R Custom Fitted Foam Seat(2010 model or newer)

V1-R Custom Fitted Foam Seat for paddlers that have no need to adjust their leg length in the canoe cockpit. The custom seat also doubles as a light...
$175.00

... more info

V1-X Custom Fitted Foam Seat(2009 model or newer)

V1-X Custom Fitted Foam Seat(2009 model or newer)

V1-X Custom Fitted Foam Seat for paddlers that have no need to adjust their leg length in the canoe cockpit. The custom seat also doubles as a light...
$175.00

... more info

Whale Tail Yoke for Huki canoes & surfskis

Whale Tail Yoke for Huki canoes & surfskis

Yoke or T-bar to fit all Huki paddle craft. This ornate whale tail shaped yoke has been used on all Huki paddle craft since the turn of the century....
$35.00

... more info

OC-6 Seat Pad for Bench Style Seats

OC-6 Seat Pad for Bench Style Seats

HUKI designed seat pad to fit most bench style seats in OC-6, OC-4, OC-3 and conventional open canoes. Fastens to a bench seat with Velcro...
$39.00  $29.00
Save: 26% off


... more info

Bungee Loop (adhesive & epoxy-on, Clear & Black)

Bungee Loop (adhesive & epoxy-on, Clear & Black)

Bungee Loop Anchors come in two styles: The Non-Self Adhesive style must be mounted using epoxy. Align the bungee loop and trace it's outline onto...
$4.00

... more info

Bungee Loop, Screw Mount

Bungee Loop, Screw Mount

Bungee Loop Anchors, Screw style: Used on our older boat models. The Screw style Bungee Loop mounts very strongly, but requires drilling and sealing...
$0.50

... more info

Surf Ski Foot Strap (Single Footwell)

Surf Ski Foot Strap (Single Footwell)

Surf Ski Foot Strap by HUKI Keeps your feet in the boat and you out of the water. Foot strap fits universally on all HUKI Surf Skis that were...
$35.00

... more info

Surf Ski Foot Straps (Double Footwell)

Surf Ski Foot Straps (Double Footwell)

Surf Ski Foot Straps by HUKI Keeps your feet in the boat and you out of the water. Foot straps fit universally on all HUKI Surf Skis with double...
$35.00

... more info

Small Knob for Rudder Shafts

Small Knob for Rudder Shafts

Replacement knob for all HUKI rudder shafts that fit Huki Outrigger Canoes and Surfskis. Three soft lobes, Threaded 1/4-20 UNC ( 1/4" Coarse...
$4.25

... more info

Small Knob for Adjustable Foot Pedals

Small Knob for Adjustable Foot Pedals

Replacement knob for early model HUKI SurfSkis with adjustable double foot wells. The older style that used two separate slotted aluminum sliding...
$4.25

... more info

Large Knob for Older Style V1's stubby rigging & ama

Large Knob for Older Style V1's stubby rigging & ama

The five lobe knob has 3/8 inch coarse threads in a blind hole. These are found on Huki stubby iako sets on our whole variety of OC-1 and OC-2. These...
$8.75

... more info

Large Knob for the V2-A

Large Knob for the V2-A

Replacement knob for the HUKI V2-A outrigger Canoe. Threaded 1/2-13 UNC ( 1/2" Coarse Thread). This knob also fits many of the older style OC-2 by...
$9.00

... more info

HUKI Universal Foam Seat for OC-1 & OC-2

HUKI Universal Foam Seat for OC-1 & OC-2

Upgrade your canoe for more comfort. Universal foam tractor seats are available to fit all OC-1's and other canoes. These seats can be fastened down...
$120.00

... more info

HUKI Seat to fit the Kaku Kaimana

HUKI Seat to fit the Kaku Kaimana

Upgrade your Kaku seat with HUKI performance. Designed for a perfect fit in a Kiamana cockpit. Fits great and feels better! Custom HUKI seat to fit...
$155.00

... more info

HUKI Seat to fit the Kaku Elua

HUKI Seat to fit the Kaku Elua

This custom hand made foam seat is long lasting closed cell foam and is shaped for improved comfort and stability. It fits the early version Kaku...
$155.00

... more info

Detent Button ( HUKI Canoes)

Detent Button (HUKI Canoes)

Stainless spring detent, 3/8" diameter, to fit iako tubes on HUKI canoes. This button size was often used on Kaku canoes and John Martin canoes. Made...
$5.00

... more info

Detent Button (Other Canoes)

Detent Button (Other Canoes)

Stainless spring detent, 5/16" diameter, to fit iako tubes on canoes from some other manufacturers. This button was used an a large variety of canoes...
$5.00

... more info


Monthly Specials For December

OC-6 Seat Pad for Bench Style Seats
OC-6 Seat Pad for Bench Style Seats
$39.00  $29.00
Save: 26% off

Copyright © 2017 huki.com. Powered by Zen Cart
if you have to think ... you haven't been Zenned!